S20S S20S 氣剪頭 日本NILE 利萊 氣剪 風剪頭 S2S S4S
詳細參數
S20S 氣剪頭 日本NILE 利萊 氣剪 風剪頭 S2S S4S
S20S 氣剪頭 日本NILE 利萊 氣剪 風剪頭 S2S S4S
| Z-S刀：標準刀() | |||
| Z-S刀：附超硬碳鋼刀 | |||
| 適用刀刃(另售品) | a | b | c |
| S20S | 24 | 12 | 2.5 |
| S2S | 24 | 12 | 3.0 |
| S4S | 27 | 13 | 4.0 |
| S5S | 35 | 17 | 6.5 |
| S250S | 43 | 21 | 9.0 |
| S7PS | 43 | 20 | 7.0 |
| S7P1S | 43 | 22 | 7.0 |
| S120S | 55 | 30 | 11.0 |
| ※Z20S | 24 | 11 | 2.5 |
| ※Z2S | 24 | 10 | 3.0 |
| ※Z4S | 27 | 11 | 5.0 |
| ※Z6S | 34 | 17 | 6.0 |
| ※Z8PS | 40 | 17 | 6.0 |
| ※Z120S | 40 | 17 | 7.0 |
| MR10 | 124 | 36 | 580 | S4、S4S、CR4、EP4 | 1.6 | 1.0 | - | - | - | - |
| ※Z4、Z4S、ZCR4、ZEP4 | 1.6 | 1.0 | 0.5 | 0.5 | - | - | ||||
| 200 | 116 | 0.4-0.5 | F3、F3S、FD3、D3LS(長刀樹脂專用) | - | - | - | - | 4.0 | 2.6 | |
| Y4(無鋸齒)帶鋸齒的刀也可制作 | ||||||||||
| MR10A | 124 | 36 | 580 | S5A、CR6A、EP6A | 1.8 | 1.2 | 1.0 | - | - | - |
| ※Z6A | 1.8 | 1.2 | 1.0 | 0.5 | - | - | ||||
| 200 | 116 | 0.5-0.6 | F5A、FD5A | - | - | - | - | 5.0 | 4.0 | |
| Y6A(帶鋸齒)不帶鋸齒的刀也可制作 | ||||||||||
| MR12 | 142 | 36 | 735 | S5J | 2.3 | 1.6 | 1.2 | - | - | - |
| 210 | 116 | 0.5-0.6 | SY6J | 1.6 | - | - | - | - | - | |
| MR20 | 155 | 45 | 1.370 | S5、S5S、P6、CR6、EP6 | 2.6 | 2.0 | 1.6 | - | - | - |
| ※Z6、Z6S、ZCR6、ZEP6 | 2.6 | 2.0 | 1.6 | 1.0 | - | - | ||||
| 340 | 230 | 0.5-0.6 | F5、F5S、FD5、F5LS | - | - | - | - | 7.0 | 5.0 | |
| Y6(帶鋸齒).PO6(沖孔力.另行制作)根據作業內容另外制作 | ||||||||||
/81
S20S S20S 氣剪頭 日本NILE 利萊 氣剪 風剪頭 S2S S4S
S20S S20S 氣剪頭 日本NILE 利萊 氣剪 風剪頭 S2S S4S
所有評論僅代表網友意見，與本站立場無關。